Lab facilities at MOTION CoE

Tariffs for Lab equipment at MOTION CoE, Bhosari, Pune

Rental of Lab equipment

MOTION CoE also offers access to its Lab equipment and tools for Startups/MSMEs/Other companies at a reasonable rate. The detailed information is as follows:

Location

Bhosari, MIDC, Pimpri-Chinchwad, Pune-411026

Internet

Basic Internet connectivity included in the tariff (No commitment of a minimum bandwidth)

 

Additional Bandwidth may be made available on specific request along with the application.

General Tools

As listed in the Equipment table. For any specific tool, please submit a query through email ID given below

Cafeteria

Available (Pay and use)

Restrooms

Available

Parking

Available (both 2 & 4-Wheelers) included in the Rental Rate

Support Team

Available (on-demand)

Areas/Labs Description
Electric Vehicle Three Phase BLDC Motor Kit with DRV8312 and Piccolo MCU, 3-phase Sensor less BLDC Development Kit with NXP MPC5606B MCU, Dyno set (up to 50kW) up for motor control test, Megger/insulation meter, Phase sequence tester, Vibration meter, High voltage power source (50kW) 0-200V, High voltage power source 200-1000 V, 500 kW, Electrical Safety Analyzer (100V to 5kV), BHEV AC-001 charger, BHEV DC-001 Charger, Electronic load.
Autonomous Vehicle NVIDIA DRIVE AGX development platform, Automotive Development Platform (Connectivity), RADAR sensors and kit, IoT & Robotics development boards, IMU + GNSS / REACH RS+ SURVEY Kit, Camera (stereo and mono) with stand, Ultra-sonic sensors, LiDAR development Kit.
Mobility PCB prototyping machine, 3D prototype printer, Mixed Signal Oscilloscope (500mHz to 2GHz) Logic Analyzer, Spectrum Analyzer (one handheld and one desktop), Function/Waveform generator, Data Logger, Multimeter, Professional Soldering Station, Thermal imaging camera, Power supply, Microchip / NXP embedded development platforms, Lab computers High Speed.
Software Modelling and Simulation tools (MATLAB and Simulink or similar), Compilers (3 to 4 microcontroller families), Hardware circuit simulation (Pspice or similar), Schematic Design Layout (Mentor Graphics or Eagle), Design Analysis (MathCad).

Table-I


# Equipment Category Lab Item Description Daily Rental Rate (₹) Half-Day Rental Rate (₹)
1. Oscilloscopes & Accessories EV OSCILLOSCOPE, MSO, 1 GHZ 4,350 2,200
2. Oscilloscopes & Accessories Auto MSO (500 MHz) 1,600 800
3. Oscilloscopes & Accessories Auto Isolated Oscilloscope 1500 MHZ) 950 500
4. Oscilloscopes & Accessories EV CURRENT PROBE, 20A, 50 MHz,AC-DC 350 200
5. Oscilloscopes & Accessories EV High Voltage Probe of 500Mhz 100 50
6. Oscilloscopes & Accessories EV PROBE, DIFFERENTIAL, 50 MHZ,1.3 KV 150 100
7. Function/ Waveform generator Auto FUNCTION GENERATOR, 2 Channel: 50MHz 400 200
8. Multimeter EV Multimeter, Bench Top 6.5-digit DMM 150 100
9. Multimeter Tools Multimeter, Handheld, OLEO Display Handheld 50 50
10. Power supply EV 60V/14A, 2 Channel 400 200
11. Power supply Mobility 36V/24A, 2Channel 500 250
12. Power supply Auto 100V/50A, 2 Channel 650 350
13. Data Logger Mobility With NI software or similar 1,900 950
14. Power supply Mobility Intrepid neo-VI Red or similar 500 250
15. Vector USB EV - 500 250
16. Thermal imaging camera Auto (-20) 0c to +650 oc Removable 4 GB micro-SD memory card, 4 GB internal flash memory, 2-3 hours per battery 950 500
17. 3D Prototype Printer Tools Moulding, models rapid prototyping 900 450
18. PCB Prototyping Machine Tools PCB Prototyping Machine 1,100 550
19. Professional Soldering equipment Tools Professional Soldering equipment with SMT, with hot air Available without any cost but only with renting of other equipment Available without any cost but only with renting of other equipment
20. Tools, Tweezers etc. Tools KIT, TOOL, ELECT, S/IRON, UK PLUG, Power D1ill, Ha.uJ D1ill,Power Spanner, Mechanical Vice Available without any cost but only with renting of other equipment Available without any cost but only with renting of other equipment
21. Embedded Development Platforms Auto Open hardware computing 50 50
22. Lab Computers High Speed All Labs Intel 8th or 9th Gen i7, 32GB RAM,4GB Graphics 250 150
23. Compilers (3 to 4 microcontroller families) Auto Keil compiler, ARM Family, Microchip Family or similar 1,800 900
24. Compute Platform Auto Xavier AGX or similar 150 100
25. Open-Source Hardware Platforms Auto PixHawk /PX4 or similar 50 50
26. !MU+GNSS/REACH RS+SURVEY Kit Auto Signals: GPS/QZSS, GLONASS,BeiDou,Galileo, SBAS !MU 350 200
27. RADAR Sensor & Kit Auto Frequency Range: 77 – 79Ghz Multi- mode, multi-application capability 100 50
28. LiDAR Development Kit Auto Puck Lite Range: >= 100m horizontal (360°) and vertical 130”1 FoV 50 50
29. Camera Auto Stereo & Mono with stand Video Mode:2.2 K, 1080p,720p & WVGA 150 100
30. Motor Control Evaluation Module (EVM) / kit Auto Three Phase BLDC Motor Kit with DRV8312 & Piccolo MCU or similar 50 50
31. 3-phase Sensor less BLDC Development Kit EV For rapid prototyping & evaluation of the motor control application 150 100
32. Bidirectional Power Supply 18 kWl 0-200V EV Battery Charging & Discharging 1,550 800
33. Electronic load EV 600V / 1260A / 18kW DC E-load 3,300 1,650
34. BEVC AC-001 charger EV - 100 50
35. BEVC DC-001 Charger EV - 500 250
36. Electrical Safety Analyzer (100V to 5kV) Mobility - 2,000 1,000
37. Power Meter & Analyzer Mobility 3 phases, 4 channels 1,450 750
38. Megger/ insulation meter Auto lKV Insulation tester Insulation test range: 0.01 Mn to l0GQ 100 50

Packaged Tariffs for Labs:

For Packaged Requirements, the whole Lab could be provided for commercial use after ensuring that it doesn’t impact on the work schedule of existing Startups. The applicable tariffs excluding tax for an 8-hour usage are as follows:

Table-II

# Lab Name Daily Rental (₹) (Whole Lab/day) Half-day Rental (₹) (Whole Lab/ 4 hours)
1. EV-Lab 9,750 5,050
2. Autonomous 7,250 3,800
3. Mobility 6,300 3,200
4. Tool Room (Various Tools) 2,350 1,300

Application Process: Fill up the attached Annexures (I and II) and send the signed and scanned application to the email ID: admin.motion@stpinext.in

For general queries, call us on 020-27126616 or 020-22981000 or email us at admin.motion@stpinext.in

Note: Please allow at least 8 hours to respond to the booking request via email.

Annexure I   👉   Download
Annexure II  👉   Download

Tariff Waivers and Discounts to Alumni Companies:

a.
For companies (Startups) which have signed Incubation cum Shareholding Agreement and MOTION CoE (STPINEXT) has an Equity stake in them, will get free access to the above amenities during the graduation period as defined in the Agreement.
b.
If a company, which is onboarded with MOTION CoE completes its graduation period and MOTION CoE (STPINEXT) still holds equity in that company, then for the purpose of lab access, these companies can claim discounts for a specific lab as given in table #2 or to a specific equipment given in table #1. The discounts applicable will be based upon the number of seats rented by these companies for a minimum period of 3 months including the date of usage of the lab facility:

Table-III

# of seats rented by the Startup Discount on Lab Rental (Dail/Half Day/ Hourly per equipment)
0 (Nil Seats) No discount
1 25%
2 50%
3 75%
4 and above 100% (Free)

General Terms and Conditions:

  1. Any discounts to the above tariffs that may be requested by Startups/ Business entities will undergo a review and approval process by the respective committee.
  2. Consumables:
    a.   The cost of all consumables has to be borne by the applicant company/Startup
    b.   The MOTION CoE will verify that the consumables used are within the permissible criteria and meets the specification and compatibility requirements of individual equipment.
  1. Lab Access and Booking Process
    a.   Eligibility: The labs are open to startups, academic institutions, research organizations, and corporates working in the automotive, EV, autonomous, and mobility sectors.
    b.   Booking: All bookings must be made at least 5 business days in advance, subject to availability. Full payment must be made before the commencement of lab use.
    c.   Access Times: Labs will be accessible between 9:00 AM to 6:00 PM, Monday to Friday. Any extension beyond these hours must be pre-approved and may incur additional charges.
  1. Safety and Compliance
    a.   Safety Induction: All personnel intending to work in the labs must undergo a mandatory safety induction. This includes orientation on equipment use, emergency procedures, and lab rules.
    b.  Personal Protective Equipment (PPE): Users must wear appropriate PPE (e.g., safety glasses, gloves, and lab coats) as per the nature of their work. Failure to comply with PPE requirements may lead to termination of lab access.
    c.   Hazardous Materials: Users must inform the lab manager before bringing any hazardous materials or chemicals. All hazardous materials must be handled and disposed of in compliance with local regulations.
    d.   Equipment Use: Users are responsible for using the lab equipment safely. Any damage to equipment due to negligence or misuse will be charged to the entity responsible.
  1. Liability and Insurance
    a.   Liability Waiver: All entities must sign a liability waiver before accessing the labs. The Incubation Centre is not responsible for any injury, loss, or damage incurred while using the facilities.
    b.   Insurance: Entities must carry their own liability insurance. Proof of insurance must be provided before the commencement of lab use. The policy should cover any injuries, accidents, or damage that occur during lab work.
    c.   Equipment Damage: In case of any equipment malfunction or damage, the user must immediately report it to the lab manager. The entity responsible, will be liable for repair or replacement costs if found at fault.
  1. Fair Usage Policy
    a.   Lab Usage: Companies are prohibited from using the Lab Facilities for commercial activities (like running paid training programs) unless they have an explicit permission and revenue sharing arrangement with MOTION CoE/STPI Pune.
    b.   Lab Equipment: Lab equipment must be used as per the defined operational guidelines. Any specialized equipment requiring certifications must only be operated by qualified personnel. If unsure about equipment handling, consult with the lab manager.
    c.   Data Security: Users are responsible for the security of their data and any intellectual property generated while using the labs. The Incubation Center does not assume responsibility for any data loss or breach.
    d.   Workspace Cleanliness: Users must maintain a clean and organized workspace. All waste should be disposed of properly, and tools must be returned to their designated storage after use.
    e.   Equipment Sharing: To ensure equitable access, users are expected to share lab resources fairly. Hogging equipment or using it for non-productive purposes is not permitted.
  1. Intellectual Property (IP)
    a.   Ownership of IP: Any intellectual property developed during the use of the labs remains the property of the entity that created it. However, all users are expected to respect the confidentiality and IP rights of others.
    b.   Confidentiality: Users must not disclose any proprietary information or data of other entities working in the lab. The Incubation Center reserves the right to expel any user found violating confidentiality agreements.
  1. Security and Monitoring
    a.   Identification: All personnel must always wear their ID badges while inside the lab premises. Visitors are not allowed unless approved by the lab manager in advance.
    b.   CCTV Surveillance: The labs are under continuous CCTV monitoring for safety and security purposes. By entering the labs, users consent to this monitoring.
    c.   Access Control: Lab access will be granted only to individuals registered with the Incubation Centre. Unauthorized personnel will not be allowed to use the facilities.
  1. Emergency Protocols
    a.   Emergency Exits: Users must familiarize themselves with emergency exits and procedures. Fire extinguishers and first-aid kits are located throughout the labs.
    b.   Incident Reporting: Any accidents, near-misses, or safety incidents must be reported immediately to the lab manager. Failure to report incidents may result in penalties.
  1. Cancellation and Refund Policy
    a.   Cancellation: Bookings can be cancelled up to 48 hours in advance without penalty. Cancellations within 48 hours of the scheduled lab use will incur a 50% cancellation fee.
    b.   Refunds: No refunds will be provided for unused time if a user decides to leave early.
  1. Dispute Resolution
    a.   Mediation: Any disputes arising from the use of the labs will be resolved through mediation. If mediation fails, the dispute will be referred to arbitration as per STPI guidelines.
  1. General Conduct
    a.   Professional Behaviour: Users are expected to conduct themselves professionally and courteously. Any form of harassment, discrimination, or inappropriate behaviour will result in immediate expulsion.
    a.   MOTION CoE Authority: The Chief Operating Officer of MOTION CoE reserves the right to terminate lab access at any time if users violate these guidelines.
Apply | autoaces Incubation Progam | Startups | autoaces

  • © 2021 MOTION, Centre of Entrepreneurship (CoE) - Automotive (ACES). All rights reserved.